PRODUCTS - BLOCK WORK ACCESSORIES
Wall Ties
Wall Ties and Anchors are specially designed to secure wall skins and framework together to provide structural integrity through various forms of movement and force.A wide ranging choice of ties and fixings has been produced to provide the maximum performance for any combination of materials used in a project.
1. Frame Cramps
Designed to restrain the masonry with vertical structures,frame cramps are produced in different shapes and sizes. Ties are provided with 6mm holes or 6x18mm slots as appropriate for fixing
Length (mm)
Width (mm)
Upstand (mm)
Thickness (mm)
Material
Packing Pcs/Box
100
20/25/30/50
25/30/50
1.5/2.0/2.5/3.0/4.0
Galvanised /Stainless Steel
250
125
20/25/30/50
25/30/50
1.5/2.0/2.5/3.0/4.0
Galvanised /Stainless Steel
250
150
20/25/30/50
25/30/50
1.5/2.0/2.5/3.0/4.0
Galvanised /Stainless Steel
250
175
20/25/30/50
25/30/50
1.5/2.0/2.5/3.0/4.0
Galvanised /Stainless Steel
250
200
20/25/30/50
25/30/50
1.5/2.0/2.5/3.0/4.0
Galvanised /Stainless Steel
250
225
20/25/30/50
25/30/50
1.5/2.0/2.5/3.0/4.0
Galvanised /Stainless Steel
250
250
20/25/30/50
25/30/50
1.5/2.0/2.5/3.0/4.0
Galvanised /Stainless Steel
250
300
20/25/30/50
25/30/50
1.5/2.0/2.5/3.0/4.0
Galvanised /Stainless Steel
250
400
20/25/30/50
25/30/50
1.5/2.0/2.5/3.0/4.0
Galvanised /Stainless Steel
250
2. Movement Ties
Movement Ties are designed to restrain masonry against lateral wind loads,allowing a horizontal expansion or contraction and used where masonry restrained to steel work and in long span masonry. Ties are held in the brick work and the debonding sleeve in the plain end of the tie will allow the movement. A 10 mm gap is provided at the end between the tie and the sleeve in order to allow the expansion or contraction.
Ties are provided with 6mm holes or 6x18mm slots as appropriate for fixing.
Length (mm)
Width (mm)
Upstand (mm)
Thickness (mm)
Material
Packing Pcs/Box
100
25/50
30
1.5/2.0/2.5
Galvanised /Stainless Steel
250
150
25/50
30
1.5/2.0/2.5
Galvanised /Stainless Steel
250
200
25/50
30
1.5/2.0/2.5
Galvanised /Stainless Steel
250
225
25/50
30
1.5/2.0/2.5
Galvanised /Stainless Steel
250
250
25/50
30
1.5/2.0/2.5
Galvanised /Stainless Steel
250
300
25/50
30
1.5/2.0/2.5
Galvanised /Stainless Steel
250
400
25/50
30
1.5/2.0/2.5
Galvanised /Stainless Steel
250
3. Cavity Wall Ties
Cavity wall ties are designed to secure two leaves of a cavity wall to each other allowing them to act as structurally one.These are made in strips or wires to be embedded in the masonry of two walls.The drip feature in the tie prevents the moisture travelling across the cavity.Ties are provided with 6mm holes or 6x18mm slots as appropriate for fixing.
A.Strip Ties
Length (mm)
Width (mm)
Thickness (mm)
Material
Packing Pcs/Box
150
20,25,30,40,50
1.5,2.0,2.5,3.0
Galvanised /Stainless Steel
250
200
20,25,30,40,50
1.5,2.0,2.5,3.0
Galvanised /Stainless Steel
250
225
20,25,30,40,50
1.5,2.0,2.5,3.0
Galvanised /Stainless Steel
250
250
20,25,30,40,50
1.5,2.0,2.5,3.0
Galvanised /Stainless Steel
250
300
20,25,30,40,50
1.5,2.0,2.5,3.0
Galvanised /Stainless Steel
250
B.Wire Ties
Reference
Length (mm)
Wire Size (Dia mm)
Material
Packing Pcs/Box
BWT
150/200/250/300
3.0,4.0,5.0
Galvanised /Stainless Steel
250
DTS
150/200/250/300
3.0,4.0,5.0
Galvanised /Stainless Steel
250
DTD
150/200/250/300
3.0,4.0,5.0
Galvanised /Stainless Steel
250
ZWT
150/200/250/300
3.0,4.0,5.0
Galvanised /Stainless Steel
250
CWZ
150/200/250/300
3.0,4.0,5.0
Galvanised /Stainless Steel
250