Truss Type Mesh
Truss Type Mesh
Truss type Mesh consists of two side rods welded to a continuous diagonally shaped cross-rod forming a truss design with alternating welds not exceeding 200mm. This is used on single Wythe walls where vertical reinforcement is not present
Galvanized Steel
| Reference | Size | Length(M) | Wire Dia |
| GTM 075 | 75 mm | 3 | 3/4/5 mm |
| GTM 100 | 100 mm | 3 | 3/4/5 mm |
| GTM 150 | 150 mm | 3 | 3/4/5 mm |
| GTM 200 | 200 mm | 3 | 3/4/5 mm |
Stainless Steel
| Reference | Size | Length(M) | Wire Dia |
| STM 075 | 75 mm | 3 | 3/4/5 mm |
| STM 100 | 100 mm | 3 | 3/4/5 mm |
| STM 150 | 150 mm | 3 | 3/4/5 mm |
| STM 200 | 200 mm | 3 | 3/4/5 mm |
Other Length and Width also available on request
Description
Galvanized Steel
| Reference | Size | Length(M) | Wire Dia |
| GTM 075 | 75 mm | 3 | 3/4/5 mm |
| GTM 100 | 100 mm | 3 | 3/4/5 mm |
| GTM 150 | 150 mm | 3 | 3/4/5 mm |
| GTM 200 | 200 mm | 3 | 3/4/5 mm |
Stainless Steel
| Reference | Size | Length(M) | Wire Dia |
| STM 075 | 75 mm | 3 | 3/4/5 mm |
| STM 100 | 100 mm | 3 | 3/4/5 mm |
| STM 150 | 150 mm | 3 | 3/4/5 mm |
| STM 200 | 200 mm | 3 | 3/4/5 mm |
Other Length and Width also available on request
