-
- Block Work Accessories
Block Work Reinforcement
- Block Work reinforcement Block Work reinforcement - Expanded Block Work Mesh is used to reduce cracking within brick and block masonry by adding tensile strength to the traditional construction method. When embedded in the mortar joint forms an integral structure of great tensile strength and resists stress, vibrations and thermal changes, minimizing the effect. It is a length of expanded…
-
- Block Work Accessories, Cavity Wall Ties, Wall Ties
Cavity Wall Ties
- Movement Ties Movement Ties are designed to restrain masonry against lateral wind loads, allowing a horizontal expansion or contraction and used where masonry restrained to steel work and in long span masonry. Ties are held in the brick work and the debonding sleeve in the plain end of the tie will allow the movement. A 10 mm gap is provided…
-
- Block Work Accessories, Corner & Tees
Corner & Tees
- Corners and Tees are available for all sizes and thickness. LADDER TEE TRUSS TEE LADDER CORNER TRUSS CORNER GLT(Galvanised) GTT(Galvanised) GLC(Galvanised) GTC(Galvanised) SLT(Stainless Steel) STT(Stainless Steel) SLC(Stainless Steel) STC(Stainless Steel) Various designs which are readily available at request : Width (mm) - 50, 100, 150, 200, 250 Wire Thk (mm) - 3, 4, 5
-
- Block Work Accessories, Frame Cramps, Wall Ties
Frame Cramps
- Frame Cramps Designed to restrain the masonry with vertical structures, frame cramps are produced in different shapes and sizes. Ties are provided with 6mm holes or 6x18mm slots as appropriate for fixing.
-
- Block Work Accessories, Ladder Type Mesh
Ladder Type Mesh
- Ladder Type Mesh Ladder Type Mesh consists of two parallel side rods with cross rods welded at 400mm, thus forming a Ladder Configuration and used where vertical reinforcement is present. Galvanized Steel Reference Size Length(M) Wire Dia GLM 075 75 mm 3 3/4/5 mm GLM 100 100 mm 3 3/4/5 mm GLM 150 150 mm 3 3/4/5 mm GLM 200…
-
- Block Work Accessories, Steel Lintel Bracket
Lintels Brackets
- Steel Lintel Brackets Reference Size (mm) Thickness (mm) Lintel Size Anchor Size CB100 100 x 150 x 150 04/05/2006 CL100 4 x M8 x 80 CB150 150 x 150 x 150 04/05/2006 CL150 4 x M8 x 80 CB200 200 x 200 x 150 04/05/2006 CL200 4 x M10 x 80 CB250 250 x 200 x 150 04/05/2006 CL250 4…
-
- Block Work Accessories, Movement Ties, Wall Ties
Movement Ties
- Movement Ties Movement Ties are designed to restrain masonry against lateral wind loads, allowing a horizontal expansion or contraction and used where masonry restrained to steel work and in long span masonry. Ties are held in the brick work and the debonding sleeve in the plain end of the tie will allow the movement. A 10 mm gap is provided…
-
- Block Work Accessories, Steel Lintels
Steel Lintels
- Steel Lintels Coremetal Steel Lintels provide open span support over window and door apertures with a combination of strength and light weight resulting in efficient load bearing performance and increased productivity on site. All Lintels are manufactured to the highest quality standards in prime steel. In addition lintels can be further protected against corrosion by the addition of thermosetting powder…
-
- Block Work Accessories, Truss Type Mesh
Truss Type Mesh
- Truss Type Mesh Truss type Mesh consists of two side rods welded to a continuous diagonally shaped cross-rod forming a truss design with alternating welds not exceeding 200mm. This is used on single Wythe walls where vertical reinforcement is not present Galvanized Steel Reference Size Length(M) Wire Dia GTM 075 75 mm 3 3/4/5 mm GTM 100 100 mm 3…
-
- Block Work Accessories, Wall Ties
Wall Ties
- Wall Ties Wall Ties and Anchors are specially designed to secure wall skins and framework together to provide structural integrity through various forms of movement and force.A wide ranging choice of ties and fixings has been produced to provide the maximum performance for any combination of materials used in a project.
